产品特点
Key Features
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Intel® 5520 (Tylersburg) Chipset
3. Up to 192GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 48GB
Unbuffered DIMM
4. Dual Intel® 82574L Gigabit
Ethernet Controllers
5. 1 (x16) PCI-E 2.0 slot
6. Integrated Matrox G200eW Graphics
7. Integrated IPMI 2.0 with KVM and
Dedicated LAN
8. Mellanox ConnectX-2 DDR Infiniband
20Gbps Controller w/ QSFP connector
详细参数
|
MBD-X8DTT-HIBXF-B |
|
|
|
Form Factor |
|
Dimensions |
- 16.64" x 6.8 " (42.26cm x 17.27cm)
|
|
|
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP) |
QPI |
|
|
|
Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB** , 16GB**
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Infiniband |
- Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller
|
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
Clock Generator |
|
|
2U Chassis |
- CSE-217HQ-R1400B
- CSE-827H-R1200B
- CSE-827H-R1400B
- CSE-827HD-R1400B
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
|
|
PCI-Express |
|
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
- Note: Requires BPN-827ADP-X8-H adapter
|
LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Serial Port |
- 1 Fast UART 16550 serial port
|
Infiniband |
- 1 External QSFP Infiniband Connector
|
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- Super Doctor III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI Power Management
- Main Switch Override Mechansim
- Power-on mode for AC power recovery
|
|
|
CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
Other Features |
|
|
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|