产品特点
Power and performance are combined in Tyans Thunder K8QS Pro (S4882) 4-way AMD Opteron™ platform. With a low latency memory architecture, HyperTransport™ -based I/O implementation, the Thunder K8QS Pro delivers nothing less than a complete platform for high-processing needs. Main features include support for up to four (4) AMD Opteron 800 series processors, up to 32GB of DDR400 Registered memory with ECC, dual U320 SCSI channels, built-in video and dual Gigabit LAN ports, PCI-X 133MHz and legacy PCI support, plus multiple power management options, all of which enable the Thunder K8QS Pro (S4882) to match a wide variety of customer requirements.
详细参数
Processor • Quad µPGA 940-pin ZIF sockets • Supports up to four AMD Opteron™ 800 series processors • Four onboard 3-phase VRMs • Integrated 128-bit DDR memory controller
Chipset • AMD-8131™ HyperTransport™ PCI-X Tunnel • AMD-8111™ HyperTransport™ I/O Hub • Winbond™ W83627HF Super I/O ASIC • Total five Hardware Monitoring IC: • One ADM1027 and four LM63
Memory • 128-bit dual channel memory bus • Total sixteen 184-pin 2.5-Volt DDR DIMM sockets - 4 on each CPU • Supports up to 32GB of Registered DDR • Supports ECC and ECC with Chipkill type • memory modules • Supports DDR 400 / 333 / 266 / 200
Expansion Slots • Two independent PCI-X buses • Two 64-bit 66/33 MHz (3.3-Volt) PCI-X slots - from PCI-X bridge A • Two 64-bit 133/100/66/33 MHz (3.3-Volt) PCI-X slots - from PCI-X bridge B • One Legacy 32-bit 33MHz (5-Volt) PCI slot • Total of five usable slots
Integrated I/O • One floppy connector supports one device • Two 9-pin serial ports (1 connector & 1 header) - and one 25-pin parallel port pin-header • PS/2 mouse and keyboard connectors • Four USB v1.1 front panel headers • Two USB v2.0 connectors through VT6212
System Management • Total of nine 3-pin fan headers with tachometer monitoring • Four fan headers with (PWM) speed control • One 2-pin Chassis Intrusion header • Temperature, voltage and fan monitoring
Integrated Enhanced IDE Controller • Provides two IDE dual-drive ports for up to four EIDE devices • Supports for UDMA 33/66/100/133 IDE drives • and ATAPI compliant devices
Integrated LAN Controllers • Broadcom BCM5704C dual-channel GbE LAN - Two RJ-45 LAN connectors with LEDs - Connected to PCI-X Bridge A • Two Front Panel LED headers | |
Integrated PCI Graphics • ATI® RAGE™ XL PCI graphics controller • 8MB Frame Buffer of video memory
Integrated Serial ATA Controller (option) • One Silicon Image SI3114 controller • Four Serial ATA 1.0 ports • Supports up to four SATA drives • Supports RAID 0, 1, 10
Integrated Dual Channel SCSI (option) • LSI® 53C1030 U320 SCSI controlelr • Dual-channel Ultra320 SCSI • Connects to PCI-X Bridge A • Supports LSI® ZCR (Zero Channel RAID)
Intelligent Platform Management Interface Header • TYAN Server Management Daughter card (optional) supports features listed below via IPMI header • QLogic™ Zircon Baseboard Management Controller (BMC) based on powerful ARM7 technology • Tailored for IPMI highest 1.5 Spec. • Supports KCS and BT styles • Flexible Windows & Linux Management Solution • Supports RMCP and SNMP protocols • Supports ASF standard and EMP • I2C serial multi-master controllers and UARTs • Build-in IPMB connector • Remote power on/off and reset support (IPMI-over-LAN)
BIOS • Phoenix BIOS; 4Mbit LPC Flash ROM • Watchdog timer • USB boot support • 48-bit LBA Support • Supports PXE via Ethernet • ACPI 2.0 & 1.0B support
Form Factor
• SSI MEB footprint (13"x16"; 330.2x406.4mm) • EPS12V power connectors • Serial (one) and VGA (one) connectors • Stacked USB 2.0 (two) connectors • Stacked PS/2 keyboard and mouse connectors • Two RJ-45 side-by-side LAN connectors with LEDs
Regulatory • FCC Class B (Declaration of Conformity) • European CE (Declaration of Conformity). | |